Dear valued customers,

There had been a number of new developments in the scene of Machine Vision in the past few months. We are delighted to be able to bring you yet more new products, the latest technologies and solutions only made available recently for the machine vision applications!

We are also proud to introduce some of the most cost effective and specifically designed integrated products for machine vision applications. These products are integrated to support you. and it is made possible due to our newly enhanced engineering R&D capabilities being setup to support you..

Here are some of the latest additions, popular products and customised solutions....

New Products	A-Series: CV-A1, CV-A50, CV-A60, CV-A11 megapixel progressive scan camera by JAI
	An Affordable megapixel progressive scan industrial CCD camera that features a small size and analogue output.  Latest model in the new A-series of compact "switchless" industrial CCD cameras.  First A-series camera to combine a megapixel resolution (1392 x 1040) analog output with remote setup via RS-232C interface.  Variety of trigger modes, such as edge pre-select, pulse width control, frame-delay readout and smearless.
	Piranha 2 world's fastest, most responsive line scan camera by DALSA
	Incredible responsivity—even at 160MHz throughput, Piranha2 requires less light than the original Piranha.  Camera Link™ interface for easy cabling and camera control. Real-time flat-field pixel correction removes image distortion due to uneven illumination, optical vignetting, sensor FPN and PRNU, and other imaging system sources. Smaller and thinner for easier mounting and minimized optical path. Provides side-by-side stackability for multicamera applications such as web inspection.
	DALSTAR 2M30-SA stop action camera by DALSA
	The newest area scan camera for industrial inspection and metrology, traffic management, and robotics.  Uses a two-megapixel interline transfer CCD in your choice of 1600 x 1200 or 1920 x 1080 configurations--twice the resolution of "standard" 1k x 1k cameras. Both configurations output up to 30 frames per second (fps) at full resolution. Offers "Stop Action" (SA) imaging, allowing smear-free capture of fast moving objects. 0-bit dynamic range allow it to thrive in demanding applications such as PCB inspection and traffic management.
	Common Vision Blox Driver for LabView® by STEMMER IMAGING
	Allows hardware-independent image recording from Common Vision Box (CVB) to be used in the context of the LabView software from National Instruments.  All the image sources supported by CVB, including the network driver from CVB Connect, can be made available to LabView users with this driver and can then be further processed using the normal methods and image processing algorithms available in this program. In Common Vision Blox, an »abstracted CVB image« is generated from each captured image. This means that any downstream software development based on this image can be completely decoupled from the technology used to capture the image. LabView® is a registered trademark of National Instruments. Other news from Stemmer Imaging
	Common Vision Blox iTuition fast application development via GUI by STEMMER IMAGING
	Graphical programming interface vastly simplifies the creation of image processing applications with Common Vision Blox (CVB). ergonomically designed interface offers a more user-friendly graphical programming environment where programmers no longer have to struggle with the traditional programming languages. Drag and drop the necessary functions into their project and then parameterize them. More than "just" a graphical interface: The applications created by the user are actually compiled internally. Technical details from Stemmer Imaging
Popular Products	CV-A1 1/2" megapixel progressive scan camera by JAI
	Affordable megapixel progressive scan industrial CCD camera that features a small size and analogue output. The latest model in the new A-series of compact "switchless" industrial CCD cameras. Other features of the CV-A1 camera include a variety of trigger modes, such as edge pre-select, pulse width control, frame-delay readout and smearless.
	PICOLO frame grabber by Euresys
	A very low-cost PCI frame grabber optimized for single camera applications.   Supports the acquisition and the real-time transfer of full resolution color images or sequences of images to the PC memory.  Square-pixel resolution (640 x 480 or 768 x 576) is achieved at full frame rate (30 or 25 fps). Up to three cameras can be connected. Picolo acquires images from any one of them. The ideal frame grabber for cost-sensitive applications in the fields of machine vision, access control, x-ray inspection.
	Xcaliper 5.0 Imaging software tool by FLIR Systems
	XCaliper 5.0 combines a powerful set of machine vision tools, real-time performance, and the flexibility of mainstream software in one cohesive, easy to use software package.  Using XCaliper 5.0 you can write powerful, flexible, and portable code to address a wide range of applications including: precision gauging; parts presence; assembly verification; pattern recognition; alignment; colour matching; grayscale OCR; print quality inspection.
Customised Products	CR-400 Cross Hair Generator Measurement Systems
	Developed with multiple features to assist engineers to perform difficult engineering measurement tasks. Can be integrated with a microscope to perform the task.
	LS-450  Line Scan Development System
	Simple to use vision system designed to help system integrators understand the working principle of line scan. Thereafter, customising the LS-450 to individual customer needs.
	MA-V1 High Speed Video Motion Analyzer
	Real-time uncompressed video recording and processing system Immediate real-time playback.  Best solution for acquiring, viewing and processing sequences of images under real-time condition.

Please feel free to explore the pages and your feedback will be most welcomed.

 

This page was last updated on May 2004.