Accessories

 

Directed Perception, Inc (USA) 
    - Computer Controlled Pan-Tilt Unit
 
Ultravision Pte Ltd (Singapore) 
    - R&D Camera Stands and Lighting Mounting Arms
 

    
      

 


PTU-46-17.5 & PTU-46-70 
Computer Controlled Pan-Tilt Unit
by Directed Perception, Inc		    
Directed Perception, Inc
Check out principle's homepage

Overview of Standard Features
  • Simple to use from any RS-232/485 host computer
  • Fast and accurate camera positioning at low cost
  • Precise control of position, speed and acceleration
  • Small form factor
  • Provides on-the-fly position and speed changes
  • Self calibration upon reset
  • Can network multiple pan-tilts from a single host computer port
  • ASCII commands for simplicity, binary commands for speed
  • Flexible DC power requirements
  • Power consumption can be controlled from host
  • Radiation hardened


CE Mark certified for Europe!

 PTU-46-17.5 Features

PTU-46-70 Features

 

Note: For Direct Perception's equipment or accessories that you are sourcing but not available in the above listing, please refer to Direct Perception's web site: http://www.dperception.com or contact Ultravision for any other assistance.  

 

[Top of page]

 

 

R&D Camera Stands and Lighting Mounting Arms
by Ultravision Pte Ltd

R2, R3 - Copy Stands
 
Non-reflective dull black base board with grid surface markings. Column with cm an inch scales. Hand crank-operated height adjustment by friction drive on plastic bearings. Copy arm with 1/4" connecting thread.

Base board: approx 400 x 500 x 25 mm (15.7 x 19.7 x 1 in)
Column height: approx 760 mm (30 in)
Loading capacity: 1.5 kg (3.3 lbs) max

 

 

5560 - Copy Light Mounting Arms
 
For all copy stands and for conversion of enlargers to copy stands. The mounting arms are adjustable in height and tilt and can be equipped with copy lighting fixtures or with the flash/light fixtures for attaching flash equipment or halogen lamps. Clamp attachment for thickness up to 45 mm (1.8 in).

 

 

[Top of page]